Home > Zirconia Based Ceramics >

Dental Laboratory Milling Supplies Core Dental Ceramics ST 16 Pre - shaded

Product Categories

Dental Zirconia Blank [38]
Dental Zirconia Blocks [32]
High Translucent Zirconia [55]
Multilayer Zirconia [23]
Dental 4D Explore [34]
Dental Milling Burs [16]
Ingot Press [14]
Dental Casting Wax [8]
Dental Composite Resin [4]
Hybrid Ceramic Blocks [9]
Zirconia Based Ceramics [12]
Zirconium Oxide Ceramic [20]
Yttria Stabilized Zirconia Ceramic [9]

Shenzhen Upcera Dental Technology Co., Ltd.

Contact Now

Dental Laboratory Milling Supplies Core Dental Ceramics ST 16 Pre - shaded

Name: Dental Laboratory Milling Supplies Core Dental Ceramics ST 16 Pre shaded
Brand: UPCERA
Price: 1 USD

Brand Name : UPCERA

Model Number : ST-Color

Certification : CE、 FDA 、CFDA、KFDA

Place of Origin : China

Price : Negotiation

Payment Terms : T/T

Supply Ability : 10 working days after received your payment

Packaging Details : Carton

Density before sintering (g/cm3) : 3.1±0.5 g/cm3

Density after sintering (g/cm3) : 6.08±0.01 g/cm3

CTE after sintering (25-200℃) : (10.5±1.0)x10-6K-1

3-point bending strength after sintering (MPa) : 1100Mpa

Average transmittance : 25~39%

Chemical solubility after sintering (μg/cm2) : < 100

Radioactivity after sintering (Bq/g) : <0.1

Sintering temperature (℃) : 1450-1550℃Recommended 1530℃

Contact Now

Dental Laboratory Milling Supplies Core Dental Ceramics ST 16 Pre - shaded

Specifications:

ST COLOR block: suitable for single shaded crown and bridge with VITA classic 16 shades(A1/A2/A3/A3.5/A4/B1/B2/B3/B4/C1/C2/C3/C4/D2/D3/D4)

ZZ CAD/CAM		D95-10
		D95-12
		D95-14
		D95-16
		D95-18
		D95-20
		D95-22
		D95-25
		D95-30

Indications:

	ST Color
crown	√
Bridge	√
3-4 units bridge	√
5-6 units bridge	√
Bridges over 7 units	√
Cantilever bridge	√
Inlay bridge	√
Maryland bridge	√
Telescopic crown	√
Personalized abutment	√

Operation Guide:

1 .Place a zirconia block in your CAD/CAM machine and machine it following the manufacturer’s instructions.
2 .After machining is completed, remove the zirconia block from the CAD/CAM machine first. Then remove the framework from the zirconia block with a diamond disc. Subsequently, place the framework on a sintering tray with zirconia beads and put them in the oven for sintering.
3 .Program the furnace according to its instruction manual and zirconia block’s sintering chart, and then start sintering.
4 .Do not remove the sintered framework until it is fully cooled down. Examine the sintered framework for wall thickness, margin fit and seat fit. If necessary, make minor adjustments with a water cooled diamond tool.
5 .Make sure no wall thickness is less than 0.5mm and no connector is thinner than 9mm².
6 .Rinse the sintered framework with water and dry completely.

Product Tags:

zirconium dioxide ceramic

dental ceramic materials

China Dental Laboratory Milling Supplies Core Dental Ceramics ST 16 Pre - shaded wholesale

Dental Laboratory Milling Supplies Core Dental Ceramics ST 16 Pre - shaded Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Upcera Dental Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!